Masana'antar da masana'antun famfon centrifugal na ANS(V) na China

Fasali

Man shafawa na ASN da ASNV na zamani sune matattarar tsotsa mai raba volute guda ɗaya (akwati) famfon centrifugal sabon ƙarni ne na famfon centrifugal mai aiki mai ƙarfi guda ɗaya, wanda galibi ake amfani da shi don tashar ruwa, kwandishan, sake amfani da ruwa, tsarin dumama, da samar da ruwa mai tsayi a gine-gine, tashoshin ban ruwa da magudanar ruwa, tashoshin wutar lantarki, tsarin samar da ruwa na masana'antu, Tsarin Wuta, masana'antar gina jiragen ruwa, da sauran wurare na watsa ruwa.

Ma'anar Samfura

ANS(V) 150-350(I)A
ANS	Famfon centrifugal mai kwance a kwance
(V)	Nau'in tsaye
150	Diamita na fitarwa na famfo 150mm
350	Diamita na impeller 350mm
A	Impeller ta hanyar yankewa ta farko
(Ni)	Kamar yadda aka faɗaɗa kwararar ruwa

ASN Kwance irin famfo

ASNV Tsaye nau'in famfo

BAYANAI NA FASAHA

Sigar Aiki

diamita	DN 80-800MM
Ƙarfin aiki	Ba fiye da mita 11600 ba³/h
Kai	Ba fiye da mita 200 ba
Zafin Ruwa	Har zuwa 105℃

Riba

1. Tsarin tsari mai sauƙi, kyakkyawan tsari da sauƙin shigarwa.

2. Yin amfani da na'urar busar da iska mai tsotsa mai tsari biyu wanda aka tsara shi da kyau yana sa ƙarfin axial ya ragu zuwa mafi ƙaranci kuma yana da salon ruwan wukake mai kyau na aikin hydraulic, duka saman ciki na famfo da saman busar da iska, waɗanda aka yi su daidai, suna da santsi sosai kuma suna da tsayayyen aiki mai ƙarfi na juriya ga tsatsa da kuma ingantaccen aiki.

3. Akwatin famfon an yi shi ne da tsarin volute biyu, wanda hakan ke rage ƙarfin radial sosai, yana rage nauyin bearing da tsawon rayuwar bearing.

4.Bearing yana amfani da bearings na SKF da NSK don tabbatar da cewa yana aiki da kyau, yana da ƙarancin hayaniya da kuma tsawon lokaci.

5. Hatimin shaft yana amfani da hatimin injina ko na cikawa na BURGMANN don tabbatar da cewa babu zubewa a cikin awanni 8000.

6. Ma'aunin flange: GB, HG, DIN, ANSI, bisa ga buƙatunku.

Tsarin Kayan da aka Ba da Shawara

Tsarin Kayan da aka Ba da Shawara (Don tunani kawai)
Abu	Ruwa mai tsabta	Sha ruwa	Ruwan najasa	Ruwan zafi	Ruwan teku
Akwati da Murfi	An yi amfani da ƙarfe HT250	SS304	Ductile iron QT500	Karfe mai carbon	Duplex SS 2205/Tagulla/SS316L
Impeller	An yi amfani da ƙarfe HT250	SS304	Ductile iron QT500	2Cr13	Duplex SS 2205/Tagulla/SS316L
Sanye da zobe	An yi amfani da ƙarfe HT250	SS304	Ductile iron QT500	2Cr13	Duplex SS 2205/Tagulla/SS316L
Shaft	SS420	SS420	40Cr	40Cr	Duplex SS 2205
Hannun shaft	Karfe mai carbon/SS	SS304	SS304	SS304	Duplex SS 2205/Tagulla/SS316L
Bayani: Cikakken jerin kayan zai dogara ne akan yanayin ruwa da wurin da aka sanya su

SANARWA kafin yin oda

Sigogi da ake buƙata don a gabatar da su bisa ga oda Masana'antu Ana yaɗa famfon ruwa tare da injin lantarki.

1. Tsarin famfo da kwararar ruwa, kai (gami da asarar tsarin), NPSHr a wurin da ake so yanayin aiki.

2. Nau'in hatimin shaft (dole ne a lura ko dai hatimin inji ko na marufi, kuma idan ba haka ba, za a yi jigilar tsarin hatimin inji).

3. Alkiblar motsi na famfon (dole ne a lura da yanayin shigarwar CCW, idan kuma ba haka ba, za a yi jigilar shigarwar a hankali).

4. Sigogi na motar (Mai amfani da tsarin Y na IP44 gabaɗaya ana amfani da shi azaman injin ƙarancin wutar lantarki mai ƙarfin <200KW kuma, lokacin da za a yi amfani da shi mai ƙarfin lantarki mai yawa, a lura da ƙarfinsa, ƙimar kariya, ajin rufi, hanyar sanyaya, ƙarfi, adadin polarity da masana'anta).

5. Kayan da aka yi da kayan famfo, bututun ƙarfe, shaft da sauransu. (za a yi jigilar kaya tare da rabon da aka saba bayarwa idan ba a lura da shi ba).

6. Matsakaicin zafin jiki (za a yi isarwa ta hanyar yanayin zafi mai ɗorewa idan ba a lura da shi ba).

7. Idan ma'aunin da za a ɗauka ya yi tsatsa ko kuma ya ƙunshi hatsi masu tauri, a lura da siffofinsa.